Cisco Courses

Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers

Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content

Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts

Troubleshoot Layer 2 connectivity using VLANs and trunking

Implementation of redundant switched networks using Spanning Tree Protocol

Troubleshooting link aggregation using Etherchannel

Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)

Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6

Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking

Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)

Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)

Describe the virtualization technology of servers, switches, and the various network devices and components

Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)

Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards

Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture

Describe wireless roaming and location services

Describe how APs communicate with WLCs to obtain software, configurations, and centralized management

Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-shared Key (PSK) wireless client authentication on a WLC

Troubleshoot wireless client connectivity issues using various available tools

Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager

Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting

Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP

Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits

Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features

Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience

Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways

Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane

Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points

Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network

Explain basic Python components and conditionals with script writing and analysis

Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF

Describe APIs in Cisco DNA Center and vManage

Describe the Cisco Firepower Threat Defense system and key concepts of NGIPS and NGFW technology

Describe how to perform the configurations tasks required for implementing a Cisco Firepower Threat Defense device

Describe how to implement quality of service (QoS) and Network Address Translation (NAT) by using Cisco Firepower Threat Defense

Perform an initial network discovery using Cisco Firepower to identify hosts, applications, and services

Identify and create the objects required as prerequisites to implementing access control policies

Describe the behavior, usage, and implementation procedure for access control policies

Describe the concepts and implementation procedure of security intelligence features

Describe Cisco Advanced Malware Protection (AMP) for Networks and the implementation procedure of file control and advanced malware protection

Implement and manage intrusion policies

Explain the use of network analysis policies and the role of preprocessor technology in processing network traffic for NGIPS inspection

Describe and demonstrate the detailed analysis techniques and reporting features provided by the Cisco Firepower Management Center

Describe key Cisco Firepower Management Center system administration and user account management features

Describe the processes that can be used to troubleshoot Cisco Firepower Threat Defense systems

Describe information security concepts and strategies within the network

Describe common TCP/IP, network application, and endpoint attacks

Describe how various network security technologies work together to guard against attacks

Implement access control on Cisco ASA appliance and Cisco Firepower Next-Generation Firewall

Describe and implement basic email content security features and functions provided by Cisco Email Security Appliance

Describe and implement web content security features and functions provided by Cisco Web Security Appliance

Describe Cisco Umbrella security capabilities, deployment models, policy management, and Investigate console

Introduce VPNs and describe cryptography solutions and algorithms

Describe Cisco secure site-to-site connectivity solutions and explain how to deploy Cisco IOS VTI-based point-to-point IPsec VPNs, and point-to-point IPsec VPN on the Cisco ASA and Cisco FirePower NGFW

Describe and deploy Cisco secure remote access connectivity solutions and describe how to configure 802.1X and EAP authentication

Provide basic understanding of endpoint security and describe AMP for Endpoints architecture and basic features

Examine various defenses on Cisco devices that protect the control and management plane

Configure and verify Cisco IOS Software Layer 2 and Layer 3 Data Plane Controls

Describe Cisco Stealthwatch Enterprise and Stealthwatch Cloud solutions

Describe basics of cloud computing and common cloud attacks and how to secure cloud environment

Describe Cisco ISE architecture, installation, and distributed deployment options

Configure Network Access Devices (NADs), policy components, and basic authentication and authorization policies in Cisco ISE

Implement Cisco ISE web authentication and guest services

Deploy Cisco ISE profiling, posture, and client provisioning services

Describe administration, monitoring, troubleshooting, and TrustSec SGA security

Configure device administration using TACACS+ in Cisco ISE

Describe the Cisco Collaboration solutions architecture

Compare the IP Phone signaling protocols of Session Initiation Protocol (SIP), H323, Media Gateway Control Protocol (MGCP), and Skinny Client Control Protocol (SCCP)

Integrate and troubleshoot Cisco Unified Communications Manager with LDAP for user synchronization and user authentication

Implement Cisco Unified Communications Manager provisioning features

Describe the different codecs and how they are used to transform analogue voice into digital streams

Describe a dial plan, and explain call routing in Cisco Unified Communications Manager

Implement Public Switched Telephone Network (PSTN) access using MGCP gateways

Implement a Cisco gateway for PSTN access

Configure calling privileges in Cisco Unified Communications Manager

Implement toll fraud prevention

Implement globalized call routing within a Cisco Unified Communications Manager cluster

Implement and troubleshoot media resources in Cisco Unified Communications Manager

Describe Cisco Instant Messaging and Presence, including call flows and protocols

Describe and configure endpoints and commonly required features

Configure and troubleshoot Cisco Unity Connection integration

Configure and troubleshoot Cisco Unity Connection call handlers

Describe how Mobile Remote Access (MRA) is used to allow endpoints to work from outside the company

Analyze traffic patterns and quality issues in converged IP networks supporting voice, video, and data traffic

Define QoS and its models

Implement classification and marking

Configure classification and marking options on Cisco Catalyst switches

Integrate and troubleshoot Cisco Unified Communications Manager with Lightweight Directory Access Protocol (LDAP) for user synchronization and user authentication

Implement Cisco Unified Communications Manager provisioning features

Configure and troubleshoot collaboration endpoints

Configure Cisco Unity Connection integration

Configure and troubleshoot Cisco Unity Connection and Cisco Unity Connection call handlers

Configure and troubleshoot Cisco Unity Express

Describe SSO for Cisco Unified Communications applications

Describe how Cisco Jabber and Cisco Unified Communications Manager IM and Presence are integrated with other Cisco or third-party applications

Customize the Cisco Unified Communications Manager IM and Presence and Cisco Jabber functionality

Configure and troubleshoot chat rooms and message archiving

Troubleshoot Cisco Jabber and Cisco Unified Communications Manager IM and Presence

Integrate Cisco Unified Attendant Console Advanced with Cisco Unified Communications Manager and Cisco Unified Communications Manager IM & Presence server

Configure call recording and monitoring

Analyze and troubleshoot SIP, H.323, and media protocols

Implement time-of-day routing, call park, call pickup, and meet-me conferences in Cisco Unified Communications Manager

Implement call coverage in Cisco Unified Communications Manager

Configure and troubleshoot Cisco Unified Communications Manager Device Mobility

Configure and troubleshoot Cisco Unified Communications Manager Extension Mobility

Configure and troubleshoot Cisco Unified Communications Manager Unified Mobility

Implement Cisco Unified Communications Manager Express for SIP phones

Implement globalized call routing within and between Cisco Unified Communications Manager clusters

Implement Media Gateway Control Protocol (MGCP) fallback and Survivable Remote Site Telephony (SRST) in Cisco Unified Communications Manager and in Cisco IOS® XE gateways

Implement Call Admission Control and Automated Alternate Routing (AAR) in Cisco Unified Communications Manager

Implement URI calling in Cisco Unified Communications Manager for calls within a cluster and between clusters

Troubleshoot multisite Cisco Unified Communications Manager deployments

Implement Intercluster Lookup Service (ILS) between Cisco Unified Communications Manager clusters and enable General Data Protection Regulation (GDPR)

Configure and troubleshoot Cisco Unified Border Element

Examine API and automation capabilities and concepts for Cisco Unified Communication Manager

Examine API and automation capabilities and concepts for Cisco Unity Connection

Examine API and automation capabilities and concepts for Cisco Finesse

Examine Experience API (xAPI) and automation capabilities and concepts for Cisco Collaboration endpoints

Examine API and automation capabilities and concepts for Cisco Webex Teams

Examine API and automation capabilities and concepts for Cisco Webex Meetings

Describe information security concepts and strategies within the network

Describe common TCP/IP, network application, and endpoint attacks

Describe how various network security technologies work together to guard against attacks

Implement access control on Cisco ASA appliance and Cisco Firepower Next-Generation Firewall

Describe and implement basic email content security features and functions provided by Cisco Email Security Appliance

Describe and implement web content security features and functions provided by Cisco Web Security Appliance

Describe Cisco Umbrella security capabilities, deployment models, policy management, and Investigate console

Introduce VPNs and describe cryptography solutions and algorithms

Describe Cisco secure site-to-site connectivity solutions and explain how to deploy Cisco IOS VTI-based point-to-point IPsec VPNs, and point-to-point IPsec VPN on the Cisco ASA and Cisco FirePower NGFW

Describe and deploy Cisco secure remote access connectivity solutions and describe how to configure 802.1X and EAP authentication

Provide basic understanding of endpoint security and describe AMP for Endpoints architecture and basic features

Examine various defenses on Cisco devices that protect the control and management plane

Configure and verify Cisco IOS Software Layer 2 and Layer 3 Data Plane Controls

Describe Cisco Stealthwatch Enterprise and Stealthwatch Cloud solutions

Describe basics of cloud computing and common cloud attacks and how to secure cloud environment

Describe Cisco ISE architecture, installation, and distributed deployment options

Configure Network Access Devices (NADs), policy components, and basic authentication and authorization policies in Cisco ISE

Implement Cisco ISE web authentication and guest services

Deploy Cisco ISE profiling, posture, and client provisioning services

Describe administration, monitoring, troubleshooting, and TrustSec SGA security

Configure device administration using TACACS+ in Cisco ISE

Describe the Cisco Collaboration solutions architecture

Compare the IP Phone signaling protocols of Session Initiation Protocol (SIP), H323, Media Gateway Control Protocol (MGCP), and Skinny Client Control Protocol (SCCP)

Integrate and troubleshoot Cisco Unified Communications Manager with LDAP for user synchronization and user authentication

Implement Cisco Unified Communications Manager provisioning features

Describe the different codecs and how they are used to transform analogue voice into digital streams

Describe a dial plan, and explain call routing in Cisco Unified Communications Manager

Implement Public Switched Telephone Network (PSTN) access using MGCP gateways

Implement a Cisco gateway for PSTN access

Configure calling privileges in Cisco Unified Communications Manager

Implement toll fraud prevention

Implement globalized call routing within a Cisco Unified Communications Manager cluster

Implement and troubleshoot media resources in Cisco Unified Communications Manager

Describe Cisco Instant Messaging and Presence, including call flows and protocols

Describe and configure endpoints and commonly required features

Configure and troubleshoot Cisco Unity Connection integration

Configure and troubleshoot Cisco Unity Connection call handlers

Describe how Mobile Remote Access (MRA) is used to allow endpoints to work from outside the company

Analyze traffic patterns and quality issues in converged IP networks supporting voice, video, and data traffic

Define QoS and its models

Implement classification and marking

Configure classification and marking options on Cisco Catalyst switches

Integrate and troubleshoot Cisco Unified Communications Manager with Lightweight Directory Access Protocol (LDAP) for user synchronization and user authentication

Implement Cisco Unified Communications Manager provisioning features

Configure and troubleshoot collaboration endpoints

Configure Cisco Unity Connection integration

Configure and troubleshoot Cisco Unity Connection and Cisco Unity Connection call handlers

Configure and troubleshoot Cisco Unity Express

Describe SSO for Cisco Unified Communications applications

Describe how Cisco Jabber and Cisco Unified Communications Manager IM and Presence are integrated with other Cisco or third-party applications

Customize the Cisco Unified Communications Manager IM and Presence and Cisco Jabber functionality

Configure and troubleshoot chat rooms and message archiving

Troubleshoot Cisco Jabber and Cisco Unified Communications Manager IM and Presence

Integrate Cisco Unified Attendant Console Advanced with Cisco Unified Communications Manager and Cisco Unified Communications Manager IM & Presence server

Configure call recording and monitoring

Analyze and troubleshoot SIP, H.323, and media protocols

Implement time-of-day routing, call park, call pickup, and meet-me conferences in Cisco Unified Communications Manager

Implement call coverage in Cisco Unified Communications Manager

Configure and troubleshoot Cisco Unified Communications Manager Device Mobility

Configure and troubleshoot Cisco Unified Communications Manager Extension Mobility

Configure and troubleshoot Cisco Unified Communications Manager Unified Mobility

Implement Cisco Unified Communications Manager Express for SIP phones

Implement globalized call routing within and between Cisco Unified Communications Manager clusters

Implement Media Gateway Control Protocol (MGCP) fallback and Survivable Remote Site Telephony (SRST) in Cisco Unified Communications Manager and in Cisco IOS® XE gateways

Implement Call Admission Control and Automated Alternate Routing (AAR) in Cisco Unified Communications Manager

Implement URI calling in Cisco Unified Communications Manager for calls within a cluster and between clusters

Troubleshoot multisite Cisco Unified Communications Manager deployments

Implement Intercluster Lookup Service (ILS) between Cisco Unified Communications Manager clusters and enable General Data Protection Regulation (GDPR)

Configure and troubleshoot Cisco Unified Border Element

Examine API and automation capabilities and concepts for Cisco Unified Communication Manager

Examine API and automation capabilities and concepts for Cisco Unity Connection

Examine API and automation capabilities and concepts for Cisco Finesse

Examine Experience API (xAPI) and automation capabilities and concepts for Cisco Collaboration endpoints

Examine API and automation capabilities and concepts for Cisco Webex Teams

Examine API and automation capabilities and concepts for Cisco Webex Meetings

Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6

Optimize classic EIGRP and named EIGRP for IPv4 and IPv6

Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6

Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments

Optimize OSPFv2 and OSPFv3 behavior

Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6

Implement route redistribution using filtering mechanisms

Troubleshoot redistribution

Implement path control using Policy-Based Routing (PBR) and IP service level agreement (SLA)

Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments

Optimize MP-BGP in IPv4 and IPv6 environments

Troubleshoot MP-BGP for IPv4 and IPv6

Describe the features of Multiprotocol Label Switching (MPLS)

Describe the major architectural components of an MPLS VPN

Identify the routing and packet forwarding functionalities for MPLS VPNs

Explain how packets are forwarded in an MPLS VPN environment

Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)

Implement Dynamic Host Configuration Protocol (DHCP)

Describe the tools available to secure the IPV6 first hop

Troubleshoot Cisco router security features

Troubleshoot infrastructure security and services